Skip to navigation Skip to content

$0.00 0 items

Home / Uncategorized / Build Your Bobcat

View Bobcat Details

Build Your Bobcat

Starting Price: $1,520.00

Category: Uncategorized

Frame Size Frame Size

Gothic shaped greenhouse with 4 ft. bow spacing, one ridge purlin & wind bracing
Bows are 1.315 OD, 17 ga. Steel
Ground posts are 1.66 OD, 14 ga. 4 ft. long and are driven into the ground 2 ft. with a ground post driver that is supplied with the frame
Side wall height is around 5 ft. before the curve begins. Peak height is around 9 ft.
Straps are included to attach either a 2x6 or 2x8 wooden baseboard to the frame
Very resilient to wind and snow
Super easy to assemble

Available options:

Truss Supports (Optional) Truss Supports (Optional)

Truss included for every bow
Adding a truss support will double the strength of the greenhouse
Includes steel supports and hardware to attach to frame
Good for crop supports
Low cost for extra strength in climates with snow

Available options:

End Wall Framing (Optional) End Wall Framing (Optional)

2 x 4 end wall brackets allow you to easily attach 2 x 4 lumber to end bows
Includes 16 bracket assemblies (8 per end)
Steel end wall framing is 1 ½” square steel for clean, permanent solution for end walls
Steel is field cut to configure your end walls to your specific design. Includes all brackets and hardware

Available options:

Sliding Door (Optional) Sliding Door (Optional)

4’ wide x 7’ high single sliding door made of aluminum and polycarbonate
Includes door track for sliding and guide rollers to keep door snug against greenhouse

Available options:

Covering (Optional) Covering (Optional)

Single poly for the roof and end walls is 6 mil, 4 year clear greenhouse film
Single poly for roof and woven poly for the ends is an upgrade that provides a more resilient end wall covering for harsh winds and weather
Double poly for roof with woven poly for end walls includes both layers of film and an inflation kit that can be powered with just an extension cord. A double layer of poly offers a few extra degrees of protection when growing in cooler temperatures
Double poly for roof with polycarbonate end walls provides a permanent solution for your end walls that will last about 15-20 years that looks great and provides more insulation for your greenhouse
End wall wire lock kit is used if you have either regular or woven poly on your end walls. Enough wire lock is sent to attach your roof poly to the end bows and your end wall poly to your end wall framing
Gable wire lock is used for either end walls with polycarbonate or wood. The gable wire lock is a special wire lock with a lip that overlaps the end bow materials to help seal out moisture and provide a more clean finish to your end wall construction
Single wire lock is used along the baseboard. It creates excellent holding power for your roof poly. It includes the wire lock base, the wires and all necessary hardware to attach to your greenhouse

Available options:

Ventilation (Optional) Ventilation (Optional)

Roll-up sides include extra purlin pipe and all of the necessary hardware to convert the sides of your greenhouse for side wall ventilation. A T-handle is the least expensive option for roll-up your sides
Roll-up sides with gear box operator kits are our most common option since the gear boxes allow you to roll-up your sides much easier either with a handle or a drill crank adaptor provided that fits into a cordless drill
Double wire lock is used with roll-up sides. It creates excellent holding power for your roof and roll-up sides and adds more rigidity to your greenhouse. It includes the wire lock base, the wires and all necessary hardware to attach to your greenhouse

Available options:

Enhanced Cooling (Optional) Enhanced Cooling (Optional)

Gable peak exhaust fan and gable peak shutter thermostatically controlled is an option if you are not around to monitor your cooling. This will not provide total cooling, but will help alleviate some of the heat build-up. This is also a nice option if you are doing some winter growing and you do not want to roll-up sides if you need some ventilation. This option requires 110v power to your greenhouse

Available options:

Build Your Bobcat quantity

Shipping Information
Privacy Policy

40 Londonderry Turnpike
Hooksett, NH 03106
(877) 746-6544

© 2020 Rimol Greenhouse Systems. All Rights Reserved.
Site by Altos .

My Account
Search

Search for:
Cart 0

You're viewing: Build Your Bobcat Starting Price: $1,520.00